#include #include #include #include #include #include dio_t buttons[4] = { { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 5 }, { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 6 }, { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 7 }, { .ddr = &DDRD, .port = &PORTD, .pin = &PIND, .addr = 6 }, }; typedef struct { bool button_press[4]; } status_flags_t; status_flags_t status_flags = { .button_press = { false, false, false, false } }; ISR(INT2_vect) { for (int i = 0; i < 4; i++) { status_flags.button_press[i] = dio_read(&buttons[i]); } } int main(void) { EIMSK = 1 << INT2; EICRA |= 1 << ISC21 | 1 << ISC20; rfm_t radio = (rfm_t){ .spi = { .clock = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 1 }, .data_out = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 2 }, .data_in = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 3 }, .chip_select = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 4 }, }, .irq = { .ddr = &DDRE, .port = &PORTE, .pin = &PINE, .addr = 6 }, .reset = { .ddr = &DDRD, .port = &PORTD, .pin = &PIND, .addr = 4 }, }; rfm_error_e error; rfm_init(&radio, (uint8_t [4]){ 0xde, 0xca, 0xfb, 0xad }, 4, &error); set_sleep_mode(SLEEP_MODE_IDLE); while(1) { sei(); sleep_mode(); cli(); char msg[60]; if (status_flags.button_press[0]) { status_flags.button_press[0] = false; strcpy(msg, "normal"); } else if (status_flags.button_press[1]) { status_flags.button_press[1] = false; strcpy(msg, "spooky"); } else if (status_flags.button_press[2]) { status_flags.button_press[2] = false; strcpy(msg, "eerie"); } else if (status_flags.button_press[3]) { status_flags.button_press[3] = false; strcpy(msg, "flash"); } rfm_transmit(&radio, (uint8_t *)msg, strlen(msg) + 1); interrupt_flags_t flags = rfm_interrupts(&radio); while(!flags.packet_sent) { _delay_ms(1); flags = rfm_interrupts(&radio); } rfm_standby(&radio); } }