Design cases for the bike lighting project #250
|
|
@ -27,51 +27,7 @@ converter_length = 22.25;
|
|||
converter_height = 5;
|
||||
|
||||
|
||||
module pill(length, bevel) {
|
||||
hull() {
|
||||
translate([0, 0, (-length / 2) + bevel]) sphere(r = bevel);
|
||||
translate([0, 0, (length / 2) - bevel]) sphere(r = bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module box_face(length, width, wall_thickness, bevel) {
|
||||
center_width = width - bevel * 2;
|
||||
center_length = length - bevel * 2;
|
||||
|
||||
hull() {
|
||||
translate([-center_width / 2, -center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([center_width / 2, -center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([center_width / 2, center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([-center_width / 2, center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module channel(length, width, height) {
|
||||
union() {
|
||||
translate([0, 0, -height / 2 + wall_thickness / 2])
|
||||
box_face(length, width, wall_thickness, bevel);
|
||||
translate([-width / 2 + wall_thickness / 2, 0, 0]) rotate([0, 90, 0])
|
||||
box_face(length, height, wall_thickness, bevel);
|
||||
translate([width / 2 - wall_thickness / 2, 0, 0]) rotate([0, 90, 0])
|
||||
box_face(length, height, wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module box(length, width, height) {
|
||||
union() {
|
||||
channel(length, width, height);
|
||||
|
||||
translate([0, -length / 2 + wall_thickness / 2, 0]) rotate([90, 0, 0])
|
||||
box_face(height, width, wall_thickness, bevel);
|
||||
|
||||
translate([0, length / 2 - wall_thickness / 2, 0]) rotate([90, 0, 0])
|
||||
box_face(height, width, wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
include <./common.scad>;
|
||||
|
||||
// box(20, 10, 10);
|
||||
// color("blue", 0.5) cube([10, 20, 10], center = true);
|
||||
|
|
@ -122,6 +78,14 @@ module contact_box() {
|
|||
0])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = cell_holder_width, r = wire_radius, center = true);
|
||||
|
||||
color("green", 1) translate([-cell_holder_width / 2, 0, cell_holder_height / 2])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = 5, r = contact_thickness / 2, center = true);
|
||||
|
||||
color("green", 1) translate([cell_holder_width / 2, 0, cell_holder_height / 2])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = 5, r = contact_thickness / 2, center = true);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -140,35 +104,41 @@ module battery_slot() {
|
|||
}
|
||||
|
||||
module converter_box() {
|
||||
box_width = wall_thickness * 2 + converter_height;
|
||||
box_length = wall_thickness * 2 + converter_height;
|
||||
box_width = cell_holder_width * 2 - wall_thickness;
|
||||
difference() {
|
||||
box(box_width, cell_holder_width * 2 - wall_thickness, cell_holder_height);
|
||||
box(box_length, box_width, cell_holder_height);
|
||||
|
||||
translate([cell_holder_width - wire_radius, 0, 0])
|
||||
rotate([90, 0, 0])
|
||||
cylinder(h = box_width, r = wire_radius, center = true);
|
||||
cylinder(h = box_length, r = wire_radius, center = true);
|
||||
translate([cell_holder_width - wire_radius * 2, 0, 0])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = wall_thickness + threshold, r = wire_radius, center = true);
|
||||
|
||||
translate([-cell_holder_width + wire_radius, 0, 0])
|
||||
rotate([90, 0, 0])
|
||||
cylinder(h = box_width, r = wire_radius, center = true);
|
||||
cylinder(h = box_length, r = wire_radius, center = true);
|
||||
translate([-cell_holder_width + wire_radius * 2, 0, 0])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = wall_thickness + threshold, r = wire_radius, center = true);
|
||||
|
||||
translate([0, -box_width / 2, 0])
|
||||
translate([0, -box_length / 2, 0])
|
||||
rotate([0, 90, 0])
|
||||
cylinder(h = cell_holder_width * 2 + wall_thickness, r = wire_radius, center = true);
|
||||
|
||||
translate([-cell_holder_width * .75, (-box_width + wall_thickness) / 2, 0])
|
||||
translate([-cell_holder_width * .75, (-box_length + wall_thickness) / 2, 0])
|
||||
rotate([90, 0, 0])
|
||||
cylinder(h = wall_thickness * 2, r = wire_radius, center = true);
|
||||
|
||||
translate([cell_holder_width * .75, (-box_width + wall_thickness) / 2, 0])
|
||||
translate([cell_holder_width * .75, (-box_length + wall_thickness) / 2, 0])
|
||||
rotate([90, 0, 0])
|
||||
cylinder(h = wall_thickness * 2, r = wire_radius, center = true);
|
||||
|
||||
color("red", 1) translate([-box_width / 4, -(converter_height + wall_thickness) / 2, cell_holder_height / 2])
|
||||
cube([5, wall_thickness + threshold * 2, cell_holder_height], center = true);
|
||||
color("red", 1) translate([box_width / 4, -(converter_height + wall_thickness) / 2, cell_holder_height / 2])
|
||||
cube([5, wall_thickness + threshold * 2, cell_holder_height], center = true);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -176,7 +146,6 @@ module battery_case() {
|
|||
union() {
|
||||
translate([-cell_holder_width / 2, 0, 0]) battery_slot();
|
||||
translate([cell_holder_width / 2 - wall_thickness, 0, 0]) battery_slot();
|
||||
color("blue", 1)
|
||||
translate([-wall_thickness / 2,
|
||||
cell_holder_length / 2 + wall_thickness * 2 + battery_contact_flange_height + wall_thickness * 2 + wall_thickness / 2,
|
||||
0])
|
||||
|
|
|
|||
|
|
@ -0,0 +1,47 @@
|
|||
module pill(length, bevel) {
|
||||
hull() {
|
||||
translate([0, 0, (-length / 2) + bevel]) sphere(r = bevel);
|
||||
translate([0, 0, (length / 2) - bevel]) sphere(r = bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module box_face(length, width, wall_thickness, bevel) {
|
||||
center_width = width - bevel * 2;
|
||||
center_length = length - bevel * 2;
|
||||
|
||||
hull() {
|
||||
translate([-center_width / 2, -center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([center_width / 2, -center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([center_width / 2, center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
translate([-center_width / 2, center_length / 2, 0])
|
||||
pill(wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module channel(length, width, height) {
|
||||
union() {
|
||||
translate([0, 0, -height / 2 + wall_thickness / 2])
|
||||
box_face(length, width, wall_thickness, bevel);
|
||||
translate([-width / 2 + wall_thickness / 2, 0, 0]) rotate([0, 90, 0])
|
||||
box_face(length, height, wall_thickness, bevel);
|
||||
translate([width / 2 - wall_thickness / 2, 0, 0]) rotate([0, 90, 0])
|
||||
box_face(length, height, wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
|
||||
module box(length, width, height) {
|
||||
union() {
|
||||
channel(length, width, height);
|
||||
|
||||
translate([0, -length / 2 + wall_thickness / 2, 0]) rotate([90, 0, 0])
|
||||
box_face(height, width, wall_thickness, bevel);
|
||||
|
||||
translate([0, length / 2 - wall_thickness / 2, 0]) rotate([90, 0, 0])
|
||||
box_face(height, width, wall_thickness, bevel);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1,174 +0,0 @@
|
|||
width = 65;
|
||||
length = 75;
|
||||
height = 16;
|
||||
wall_thickness = 2;
|
||||
guide_thickness = 1;
|
||||
power_width = 21;
|
||||
output_width = 37.5;
|
||||
half_wall_thickness = wall_thickness / 2;
|
||||
standoff_thickness = 10;
|
||||
hole_diameter = 3;
|
||||
// The radius of a nut in mm. However, based on my measurements, I'm not actually sure I have this right. The short height of a nut is 7.86mm. Derive from there.
|
||||
nut_radius = 8.5 * cos(30) / 2;
|
||||
nut_height = 2.69; // mm
|
||||
screw_radius = 2;
|
||||
handlebar_radius = 15;
|
||||
clasp_thickness = 4;
|
||||
clasp_width = 35;
|
||||
circular_face_count = 96;
|
||||
|
||||
module hexagon(r, h) {
|
||||
pi = 3.1415926;
|
||||
polyhedron(
|
||||
points=[
|
||||
[r, 0, 0],
|
||||
[r * cos(60), r * sin(60), 0],
|
||||
[r * cos(120), r * sin(120), 0],
|
||||
[r * cos(180), r * sin(180), 0],
|
||||
[r * cos(240), r * sin(240), 0],
|
||||
[r * cos(300), r * sin(300), 0],
|
||||
|
||||
[r, 0, h],
|
||||
[r * cos(60), r * sin(60), h],
|
||||
[r * cos(120), r * sin(120), h],
|
||||
[r * cos(180), r * sin(180), h],
|
||||
[r * cos(240), r * sin(240), h],
|
||||
[r * cos(300), r * sin(300), h],
|
||||
],
|
||||
faces=[
|
||||
[0, 1, 2, 3, 4, 5],
|
||||
[11, 10, 9, 8, 7, 6],
|
||||
[6, 7, 1, 0],
|
||||
[7, 8, 2, 1],
|
||||
[8, 9, 3, 2],
|
||||
[9, 10, 4, 3],
|
||||
[10, 11, 5, 4],
|
||||
[11, 6, 0, 5],
|
||||
]
|
||||
);
|
||||
}
|
||||
|
||||
// Nut holders are blocks that have a hole drilled through them and a hexagonal-shaped cavity. The idea is to
|
||||
module nut_holder() {
|
||||
difference() {
|
||||
translate([-4.5, -4.5, -2]) cube([9, 9, 4]);
|
||||
union() {
|
||||
translate([0, 0, -1]) hexagon(nut_radius, 2);
|
||||
cylinder(h = 6, r = screw_radius, center = true, $fn = 24);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module screw_hole() {
|
||||
union() {
|
||||
translate([0, 0, 4]) cylinder(h = 2.1, r = screw_radius * 2, center = true, $fn = 24);
|
||||
cylinder(h = 6, r = screw_radius, center = true, $fn = 24);
|
||||
}
|
||||
}
|
||||
|
||||
module base() {
|
||||
cube([width, length, wall_thickness]);
|
||||
}
|
||||
|
||||
module face() {
|
||||
union() {
|
||||
cube([width, length, wall_thickness / 2]);
|
||||
translate([wall_thickness, wall_thickness, wall_thickness / 2]) cube([width-wall_thickness*2, length-wall_thickness*2, wall_thickness / 2]);
|
||||
translate([4.5 + wall_thickness, 4.5 + wall_thickness, 4]) nut_holder();
|
||||
translate([width - 4.5 - wall_thickness, 4.5 + wall_thickness, 4]) nut_holder();
|
||||
translate([width - 4.5 - wall_thickness, length - 4.5 - wall_thickness, 4]) nut_holder();
|
||||
translate([4.5 + wall_thickness, length - 4.5 - wall_thickness, 4]) nut_holder();
|
||||
}
|
||||
}
|
||||
|
||||
module wall(length) {
|
||||
cube([length, height, wall_thickness]);
|
||||
}
|
||||
|
||||
module power_wall() {
|
||||
difference() {
|
||||
wall(65);
|
||||
translate([9, 2, -.5]) cube([power_width, height, wall_thickness + 1]);
|
||||
}
|
||||
}
|
||||
|
||||
module output_wall() {
|
||||
difference() {
|
||||
wall(65);
|
||||
translate([9, 2, -.5]) cube([output_width, height, wall_thickness + 1]);
|
||||
}
|
||||
}
|
||||
|
||||
// Use hexagons as cutouts into which I can install a hex nut. This isn't quite right yet, but close.
|
||||
// hexagon(nut_radius, 1);
|
||||
|
||||
// cube([standoff_thickness, standoff_thickness, 2]);
|
||||
|
||||
/*
|
||||
difference() {
|
||||
union() {
|
||||
base();
|
||||
rotate([90, 0, 90]) wall(75);
|
||||
// translate([width - wall_thickness, 0, 0]) rotate([90, 0, 90]) wall(length);
|
||||
// rotate([90, 0, 0]) power_wall();
|
||||
// translate([0, length, 0]) rotate([90, 0, 0]) output_wall();
|
||||
// translate([wall_thickness,
|
||||
// wall_thickness,
|
||||
// wall_thickness]) standoff();
|
||||
// translate([width - wall_thickness - standoff_thickness,
|
||||
// wall_thickness,
|
||||
// wall_thickness]) standoff();
|
||||
// translate([wall_thickness,
|
||||
// length - wall_thickness - standoff_thickness,
|
||||
// wall_thickness]) standoff();
|
||||
// translate([width - wall_thickness - standoff_thickness,
|
||||
// length - wall_thickness - standoff_thickness,
|
||||
// wall_thickness]) standoff();
|
||||
}
|
||||
// translate([-half_wall_thickness, -wall_thickness - half_wall_thickness, height - half_wall_thickness]) cube([wall_thickness, length + wall_thickness * 2, wall_thickness]);
|
||||
// translate([width - half_wall_thickness, -wall_thickness - half_wall_thickness, height - half_wall_thickness]) cube([wall_thickness, length + wall_thickness * 2, wall_thickness]);
|
||||
// translate([-half_wall_thickness, -half_wall_thickness, height - half_wall_thickness]) rotate([0, 0, 270]) cube([wall_thickness, width + wall_thickness * 2, wall_thickness]);
|
||||
// translate([-half_wall_thickness, length + half_wall_thickness, height - half_wall_thickness]) rotate([0, 0, 270]) cube([wall_thickness, width + wall_thickness * 2, wall_thickness]);
|
||||
}
|
||||
*/
|
||||
|
||||
module box() {
|
||||
difference() {
|
||||
union() {
|
||||
cube([width, length, wall_thickness * 2]);
|
||||
translate([0, 0, wall_thickness]) rotate([90, 0, 90]) wall(length);
|
||||
translate([width - wall_thickness, 0, wall_thickness]) rotate([90, 0, 90]) wall(length);
|
||||
translate([0, wall_thickness, wall_thickness]) rotate([90, 0, 0]) wall(width);
|
||||
translate([0, length, wall_thickness]) rotate([90, 0, 0]) wall(width);
|
||||
}
|
||||
translate([4.5 + wall_thickness, 4.5 + wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
||||
translate([width - 4.5 - wall_thickness, 4.5 + wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
||||
translate([width - 4.5 - wall_thickness, length - 4.5 - wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
||||
translate([4.5 + wall_thickness, length - 4.5 - wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
||||
}
|
||||
}
|
||||
|
||||
module top_clasp() {
|
||||
difference() {
|
||||
union() {
|
||||
cylinder(h = clasp_width, r = handlebar_radius + clasp_thickness, center = true, $fn = circular_face_count);
|
||||
translate([0, 0, -clasp_width / 2]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
||||
translate([0, 0, -clasp_width / 2 + 4]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
||||
translate([0, 0, clasp_width / 2]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
||||
translate([0, 0, clasp_width / 2 - 4]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
||||
translate([-handlebar_radius-5, -10, -clasp_width / 2 + 6]) cube([6, 20, clasp_width - 12]);
|
||||
}
|
||||
translate([-0.5, 0, 0]) cylinder(h = clasp_width+2, r = handlebar_radius + 1, center = true, $fn = circular_face_count);
|
||||
translate([-0.5, -handlebar_radius - 10, -clasp_width / 2 - 1]) cube([handlebar_radius + 10, handlebar_radius * 2 + 20, clasp_width + 2]);
|
||||
}
|
||||
}
|
||||
|
||||
module body() {
|
||||
union() {
|
||||
box();
|
||||
// translate([width / 2, length / 2, -5 - handlebar_radius]) rotate([0, 90, 90]) top_clasp();
|
||||
}
|
||||
}
|
||||
|
||||
body();
|
||||
// translate([width + 10, 0, 0]) face();
|
||||
Loading…
Reference in New Issue