savanni
/
monorepo
1
0
Fork 0
Code Issues 76 Pull Requests Projects 6 Releases Wiki Activity

Fully define the geometry for a lid for the bike case #255

Merged
savanni merged 5 commits from bike-lights__case into main 2024-11-08 14:42:32 +00:00
Conversation 0 Commits 5 Files Changed 7 +19 -5
2 changed files with 19 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files
Showing only changes of commit 51f1f58e73 - Show all commits

5
bike-lights/case/common.scad
View File

@ -1,3 +1,8 @@
module hexagon(r, h) {
cylinder(r = r, h = h, $fn = 6);
}
module pill(length, bevel) {
hull() {
translate([0, 0, (-length / 2) + bevel]) sphere(r = bevel);

19
bike-lights/case/control_panel.scad
View File

@ -56,13 +56,21 @@ module base_case(length, width, height, bevel = 0) {
rotate([0, 90, 0])
box_face([width, height, wall_thickness], bevel);
// These are the sleds at the bottom of the case that should hold the lower of the two boards down
color("blue") translate([0, wall_thickness - 2, wall_thickness + 4]) cube([length - 8, 4, wall_thickness / 2]);
color("blue") translate([wall_thickness - 2, wall_thickness - 4, wall_thickness + 4]) cube([4, width, wall_thickness / 2]);
color("blue") translate([length - 25, width - wall_thickness * 3 / 2, wall_thickness + 4]) cube([16, wall_thickness, wall_thickness / 2]);
color("blue") translate([length - 25, width - wall_thickness * 3 / 2, wall_thickness + 6]) cube([16, wall_thickness, wall_thickness / 2]);
}
color("red") translate([length, wall_thickness - 2, 4]) cube([1, 2, height]);
color("red") translate([length, width - wall_thickness, 4]) cube([1, 2, height]);
// This makes an indent at the bottom to accomodate solder joins
translate([wall_thickness + 2, wall_thickness + 2, wall_thickness / 2]) cube([length, width - wall_thickness * 2 - 4, wall_thickness / 2 + threshold]);
// This creates a cutout that lets the power plug slide in better.
translate([wall_thickness, width - wall_thickness, wall_thickness]) cube([length, 2, 6]);
// These two put in the slots that should allow the fourth wall to be slotted into place.
color("red") translate([length - 1, wall_thickness - 2, 4]) cube([2, 2, height]);
color("red") translate([length - 1, width - wall_thickness, 4]) cube([2, 2, height]);
}
}
@ -110,10 +118,11 @@ module main_case() {
rotate([0, 180, 0])
linear_extrude(1)
text("right", size = 3);
translate([case_length / 2, case_width / 2, -20]) rotate([0, 90, 0]) top_clasp();
// translate([case_length / 2, case_width / 2, -20]) rotate([0, 90, 0]) top_clasp();
}
translate([case_length / 2, case_width / 2, -threshold]) hexagon(4.5, 6);
color("green", 1) translate([8.5 + wall_thickness, case_width - wall_thickness - threshold, wall_thickness])
cube([60, wall_thickness * 2, 7]);
}