175 lines
7.0 KiB
OpenSCAD
175 lines
7.0 KiB
OpenSCAD
width = 65;
|
|
length = 75;
|
|
height = 16;
|
|
wall_thickness = 2;
|
|
guide_thickness = 1;
|
|
power_width = 21;
|
|
output_width = 37.5;
|
|
half_wall_thickness = wall_thickness / 2;
|
|
standoff_thickness = 10;
|
|
hole_diameter = 3;
|
|
// The radius of a nut in mm. However, based on my measurements, I'm not actually sure I have this right. The short height of a nut is 7.86mm. Derive from there.
|
|
nut_radius = 8.5 * cos(30) / 2;
|
|
nut_height = 2.69; // mm
|
|
screw_radius = 2;
|
|
handlebar_radius = 15;
|
|
clasp_thickness = 4;
|
|
clasp_width = 35;
|
|
circular_face_count = 96;
|
|
|
|
module hexagon(r, h) {
|
|
pi = 3.1415926;
|
|
polyhedron(
|
|
points=[
|
|
[r, 0, 0],
|
|
[r * cos(60), r * sin(60), 0],
|
|
[r * cos(120), r * sin(120), 0],
|
|
[r * cos(180), r * sin(180), 0],
|
|
[r * cos(240), r * sin(240), 0],
|
|
[r * cos(300), r * sin(300), 0],
|
|
|
|
[r, 0, h],
|
|
[r * cos(60), r * sin(60), h],
|
|
[r * cos(120), r * sin(120), h],
|
|
[r * cos(180), r * sin(180), h],
|
|
[r * cos(240), r * sin(240), h],
|
|
[r * cos(300), r * sin(300), h],
|
|
],
|
|
faces=[
|
|
[0, 1, 2, 3, 4, 5],
|
|
[11, 10, 9, 8, 7, 6],
|
|
[6, 7, 1, 0],
|
|
[7, 8, 2, 1],
|
|
[8, 9, 3, 2],
|
|
[9, 10, 4, 3],
|
|
[10, 11, 5, 4],
|
|
[11, 6, 0, 5],
|
|
]
|
|
);
|
|
}
|
|
|
|
// Nut holders are blocks that have a hole drilled through them and a hexagonal-shaped cavity. The idea is to
|
|
module nut_holder() {
|
|
difference() {
|
|
translate([-4.5, -4.5, -2]) cube([9, 9, 4]);
|
|
union() {
|
|
translate([0, 0, -1]) hexagon(nut_radius, 2);
|
|
cylinder(h = 6, r = screw_radius, center = true, $fn = 24);
|
|
}
|
|
}
|
|
}
|
|
|
|
module screw_hole() {
|
|
union() {
|
|
translate([0, 0, 4]) cylinder(h = 2.1, r = screw_radius * 2, center = true, $fn = 24);
|
|
cylinder(h = 6, r = screw_radius, center = true, $fn = 24);
|
|
}
|
|
}
|
|
|
|
module base() {
|
|
cube([width, length, wall_thickness]);
|
|
}
|
|
|
|
module face() {
|
|
union() {
|
|
cube([width, length, wall_thickness / 2]);
|
|
translate([wall_thickness, wall_thickness, wall_thickness / 2]) cube([width-wall_thickness*2, length-wall_thickness*2, wall_thickness / 2]);
|
|
translate([4.5 + wall_thickness, 4.5 + wall_thickness, 4]) nut_holder();
|
|
translate([width - 4.5 - wall_thickness, 4.5 + wall_thickness, 4]) nut_holder();
|
|
translate([width - 4.5 - wall_thickness, length - 4.5 - wall_thickness, 4]) nut_holder();
|
|
translate([4.5 + wall_thickness, length - 4.5 - wall_thickness, 4]) nut_holder();
|
|
}
|
|
}
|
|
|
|
module wall(length) {
|
|
cube([length, height, wall_thickness]);
|
|
}
|
|
|
|
module power_wall() {
|
|
difference() {
|
|
wall(65);
|
|
translate([9, 2, -.5]) cube([power_width, height, wall_thickness + 1]);
|
|
}
|
|
}
|
|
|
|
module output_wall() {
|
|
difference() {
|
|
wall(65);
|
|
translate([9, 2, -.5]) cube([output_width, height, wall_thickness + 1]);
|
|
}
|
|
}
|
|
|
|
// Use hexagons as cutouts into which I can install a hex nut. This isn't quite right yet, but close.
|
|
// hexagon(nut_radius, 1);
|
|
|
|
// cube([standoff_thickness, standoff_thickness, 2]);
|
|
|
|
/*
|
|
difference() {
|
|
union() {
|
|
base();
|
|
rotate([90, 0, 90]) wall(75);
|
|
// translate([width - wall_thickness, 0, 0]) rotate([90, 0, 90]) wall(length);
|
|
// rotate([90, 0, 0]) power_wall();
|
|
// translate([0, length, 0]) rotate([90, 0, 0]) output_wall();
|
|
// translate([wall_thickness,
|
|
// wall_thickness,
|
|
// wall_thickness]) standoff();
|
|
// translate([width - wall_thickness - standoff_thickness,
|
|
// wall_thickness,
|
|
// wall_thickness]) standoff();
|
|
// translate([wall_thickness,
|
|
// length - wall_thickness - standoff_thickness,
|
|
// wall_thickness]) standoff();
|
|
// translate([width - wall_thickness - standoff_thickness,
|
|
// length - wall_thickness - standoff_thickness,
|
|
// wall_thickness]) standoff();
|
|
}
|
|
// translate([-half_wall_thickness, -wall_thickness - half_wall_thickness, height - half_wall_thickness]) cube([wall_thickness, length + wall_thickness * 2, wall_thickness]);
|
|
// translate([width - half_wall_thickness, -wall_thickness - half_wall_thickness, height - half_wall_thickness]) cube([wall_thickness, length + wall_thickness * 2, wall_thickness]);
|
|
// translate([-half_wall_thickness, -half_wall_thickness, height - half_wall_thickness]) rotate([0, 0, 270]) cube([wall_thickness, width + wall_thickness * 2, wall_thickness]);
|
|
// translate([-half_wall_thickness, length + half_wall_thickness, height - half_wall_thickness]) rotate([0, 0, 270]) cube([wall_thickness, width + wall_thickness * 2, wall_thickness]);
|
|
}
|
|
*/
|
|
|
|
module box() {
|
|
difference() {
|
|
union() {
|
|
cube([width, length, wall_thickness * 2]);
|
|
translate([0, 0, wall_thickness]) rotate([90, 0, 90]) wall(length);
|
|
translate([width - wall_thickness, 0, wall_thickness]) rotate([90, 0, 90]) wall(length);
|
|
translate([0, wall_thickness, wall_thickness]) rotate([90, 0, 0]) wall(width);
|
|
translate([0, length, wall_thickness]) rotate([90, 0, 0]) wall(width);
|
|
}
|
|
translate([4.5 + wall_thickness, 4.5 + wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
|
translate([width - 4.5 - wall_thickness, 4.5 + wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
|
translate([width - 4.5 - wall_thickness, length - 4.5 - wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
|
translate([4.5 + wall_thickness, length - 4.5 - wall_thickness, 4]) rotate([180, 0, 0]) screw_hole();
|
|
}
|
|
}
|
|
|
|
module top_clasp() {
|
|
difference() {
|
|
union() {
|
|
cylinder(h = clasp_width, r = handlebar_radius + clasp_thickness, center = true, $fn = circular_face_count);
|
|
translate([0, 0, -clasp_width / 2]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
|
translate([0, 0, -clasp_width / 2 + 4]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
|
translate([0, 0, clasp_width / 2]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
|
translate([0, 0, clasp_width / 2 - 4]) cylinder(h = 1, r = handlebar_radius + clasp_thickness + 1.5, center = true, $fn = circular_face_count);
|
|
translate([-handlebar_radius-5, -10, -clasp_width / 2 + 6]) cube([6, 20, clasp_width - 12]);
|
|
}
|
|
translate([-0.5, 0, 0]) cylinder(h = clasp_width+2, r = handlebar_radius + 1, center = true, $fn = circular_face_count);
|
|
translate([-0.5, -handlebar_radius - 10, -clasp_width / 2 - 1]) cube([handlebar_radius + 10, handlebar_radius * 2 + 20, clasp_width + 2]);
|
|
}
|
|
}
|
|
|
|
module body() {
|
|
union() {
|
|
box();
|
|
// translate([width / 2, length / 2, -5 - handlebar_radius]) rotate([0, 90, 90]) top_clasp();
|
|
}
|
|
}
|
|
|
|
body();
|
|
// translate([width + 10, 0, 0]) face();
|