avr/lantern/main.c

/*
Copyright 2022, Savanni D'Gerinel <savanni@luminescent-dreams.com>

This file is part of Savanni's AVR library.

This AVR library is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This AVR library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this AVR library. If not, see <https://www.gnu.org/licenses/>.
*/

#include <avr/interrupt.h>
#include <avr/sleep.h>
#include <dio.h>
#include <display.h>
#include "lantern.h"
#include <rfm.h>
#include <sk9822.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#define FPS                 15
#define TICKS_PER_SECOND    7812
#define FPS_TIMEOUT         TICKS_PER_SECOND / FPS
#define FPS_MS              1000 / FPS
#define PULSE_OFF_COUNT     FPS * 5
#define PULSE_ON_COUNT      5

typedef enum {
    lme_normal,
    lme_spooky,
    lme_eerie,
} lantern_msg_e;

typedef struct {
    bool frame_timeout;
} status_flags_t;

status_flags_t status_flags;

/*
ISR(TIMER1_COMPA_vect) {
    status_flags.frame_timeout = true;
}
*/

ISR(INT6_vect) {
}

/*
void setup_fps_timer(void) {
    // WGM = 0100: CTC with OCR1nA top
    // CS = 101: clock / 1024
    TCCR1A = 0;
    TCCR1B = _BV(3) | _BV(2) | _BV(0);

    // Set the top for the counter
    OCR1AH = FPS_TIMEOUT >> 8;
    OCR1AL = FPS_TIMEOUT & 0xff;

    // Enable compare on A match interrupt
    TIMSK1 |= _BV(1);
}
*/

void startup_animation(sk9822_t *lights, rgb_t *colors) {
    for (int i = 0; i < LIGHT_COUNT; i++) {
        colors[i].brightness = 1;
    }

    for (int i = 0; i < LIGHT_COUNT; i++) {
        colors[i].b = 0;
        colors[i].r = 128;
        sk9822_send(lights, colors, LIGHT_COUNT);
        _delay_ms(50);
    }

    for (int i = 0; i < LIGHT_COUNT; i++) {
        colors[i].r = 0;
        colors[i].g = 128;
        sk9822_send(lights, colors, LIGHT_COUNT);
        _delay_ms(100);
    }

    for (int i = 0; i < LIGHT_COUNT; i++) {
        colors[i].g = 0;
        colors[i].b = 128;
        sk9822_send(lights, colors, LIGHT_COUNT);
        _delay_ms(100);
    }
}

int main(void) {
    EIMSK = 1 << INT6 | 1 << INT2;
    EICRA |= 1 << ISC21 | 1 << ISC20;
    EICRB |= 1 << ISC61 | 1 << ISC60;

    status_flags.frame_timeout = false;

    // Disable unneeded modules
    PRR0 = _BV(7) | _BV(5) | _BV(2);
    PRR1 = _BV(7) | _BV(4) | _BV(3) | _BV(0);

    rfm_t radio = (rfm_t){
        .spi    = {
            .clock          = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 1 },
            .data_out       = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 2 },
            .data_in        = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 3 },
            .chip_select    = { .ddr = &DDRB, .port = &PORTB, .pin = &PINB, .addr = 4 },
        },
        .irq    = { .ddr = &DDRE, .port = &PORTE, .pin = &PINE, .addr = 6 },
        .reset  = { .ddr = &DDRD, .port = &PORTD, .pin = &PIND, .addr = 4 },
    };

    rfm_error_e error;
    rfm_init(&radio, (uint8_t [4]){ 0xde, 0xca, 0xfb, 0xad }, 4, &error);
    rfm_listen(&radio);

    sk9822_t lights = {
        .clock_pin = { .ddr = &DDRC, .port = &PORTC, .pin = &PINC, .addr = 7 },
        .data_pin = { .ddr = &DDRD, .port = &PORTD, .pin = &PIND, .addr = 6 }
    };

    rgb_t error_indicator[LIGHT_COUNT] = {
        { .brightness = 1, .r = 255, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 1, .r = 255, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 1, .r = 255, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
    };

    lantern_t lantern = lantern_new(lights);
    lantern_set_mode(&lantern, normal);

    // setup_fps_timer();

    // set_sleep_mode(SLEEP_MODE_IDLE);

    rgb_t colors[LIGHT_COUNT] = {
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
        { .brightness = 0, .r = 0, .g = 0, .b = 0 },
    };
    _delay_ms(1000);
    startup_animation(&lights, (rgb_t *)&colors);

    while(1) {
        /*
        if (status_flags.frame_timeout) {
            status_flags.frame_timeout = false;
            lantern_step(&lantern, colors);
            sk9822_send(&lights, colors, LIGHT_COUNT);
        }
        */

        lantern_step(&lantern, colors);
        sk9822_send(&lights, colors, LIGHT_COUNT);

        interrupt_flags_t flags = rfm_interrupts(&radio);
        while (flags.fifo_not_empty) {
            uint8_t msg[60];
            uint8_t length;

            rfm_receive(&radio, (uint8_t *)msg, &length);
            if (length == 1) {
                switch (msg[0]) {
                    case lme_normal:
                        lantern_set_mode(&lantern, normal);
                        break;
                    case lme_spooky:
                        lantern_set_mode(&lantern, spooky);
                        break;
                    case lme_eerie:
                        lantern_set_mode(&lantern, eerie);
                        break;
                    default:
                        break;
                }
            }
            flags = rfm_interrupts(&radio);
        }

        _delay_ms(FPS_MS);
        /*
        sei();
        sleep_mode();
        cli();
        */
    }

    sk9822_send(&lights, error_indicator, LIGHT_COUNT);
    _delay_ms(1000);

    return 0;
}